Whether it's a downtown San Antonio business or a 1,000-acre Hill Country ranch, knowing what's happening on your property — in real time, from your phone — is no longer a luxury. AEH designs and installs professional-grade CCTV and surveillance systems that are built to last, integrated with your network, and managed so they actually work when you need them.
Security systems installed by IT professionals means your cameras are integrated with your network correctly, your storage is sized properly, your remote access actually works, and your system is monitored and maintained — not just installed and forgotten.
Professional-grade IP cameras with 4K and 1080p resolution, wide dynamic range, and night vision — properly placed for maximum coverage with minimum blind spots.
Network Video Recorders sized for your camera count and retention requirements — enough storage for compliance or insurance demands.
Your cameras on your phone, anywhere in the world. We configure secure remote access properly — not default port-forwarding that exposes your system.
Know who enters your facility and when — and revoke access instantly when someone leaves. Electronic access control replaces physical keys with auditable, manageable access.
Intelligent motion detection sends alerts to your phone when activity is detected in zones you define — after hours, restricted areas, or entry points during specific windows.
A security system that hasn't been maintained is a false sense of security. We monitor your cameras for offline status, storage failures, and firmware updates.
Ranch and rural property surveillance is one of our specialties — and it's a fundamentally different challenge than covering an office building. Large acreage, multiple structures, limited power, and spotty cellular connectivity all have to be accounted for in the system design.
We've installed surveillance systems on Hill Country properties ranging from small rural residences to working cattle ranches of several hundred acres. Every system is designed around the property — not around what's on a shelf at a big-box store.
Wireless relay nodes extend coverage across outbuildings, barns, gates, and field locations — no trenching required across open acreage.
Solar panel and battery combinations power remote cameras and wireless nodes where grid power isn't available.
IR and low-light cameras positioned at gate entrances, water tanks, equipment storage, and high-value areas.
Pull up any camera on your property from your iPhone or Android while you're in San Antonio or anywhere else — secure, real-time access.
A good camera system starts with a simple question: what do you need to see, and what will you do with the footage? The answer is very different for a storefront in San Antonio than for a working ranch outside Bandera, so we plan each system around the property instead of a camera count.
How long footage is kept depends on the number of cameras, resolution, frame rate, and whether you record continuously or only on motion. We size storage to the retention you need for insurance, compliance, or simple peace of mind, and we put the recorder somewhere secure and cool, not on a shelf in a hot closet.
Footage is recorded to a network video recorder (NVR) on site, with drive redundancy available for larger systems. Important clips can be exported for insurance claims or law enforcement, and critical footage can be copied off-site through our backup and disaster recovery service so it survives a stolen or damaged recorder.
Live view and playback on your phone or computer, set up through a VPN or a secured cloud relay instead of open ports. Each person gets their own login, so access can be limited to specific cameras and removed when someone leaves. Default passwords are always changed.
Many Hill Country properties have limited upload speed. We configure a lower-bandwidth stream for phones so remote viewing stays usable on rural internet or cellular data, while the recorder keeps full-resolution video on site.
On a ranch, the hardest part of a camera system is rarely the camera. It is getting power and a network connection to a gate half a mile from the house. We plan both during the site walk, before anything is quoted.
Near buildings, cameras run on a single network cable that carries both power and data. A standard Ethernet run tops out at about 328 feet (100 meters), so longer distances call for a fiber run or a wireless link.
Wireless bridges connect barns, shops, and gates back to the main house without trenching across open acreage. Line of sight matters, so we account for hills, oak and cedar, and future growth when choosing mounting points.
Where grid power is not available, solar panels and batteries power remote cameras and wireless nodes. We size them for Texas summers and for cloudy winter stretches so cameras keep recording overnight.
Hill Country storms are hard on outdoor electronics. We use weatherproof enclosures, proper grounding, and surge protection on long cable runs to reduce lightning and weather damage.
Cameras sit outside in heat, dust, and storms. A system that is never checked tends to fail quietly, and most owners find out only when they need footage that isn't there. Ongoing maintenance keeps your system reliable:
Cleaning lenses and dome covers. Dust and spider webs cause blurry images and false motion alerts at night.
Re-aiming cameras and trimming growth that blocks a view as seasons change.
Firmware and security updates for cameras and recorders.
Checking drive health, recording schedules, and that the clock is correct on every camera.
Testing solar batteries, wireless links, and remote access, especially after major storms.
Camera health can be monitored alongside the rest of your network as part of our managed IT services.
We're based at 4333 State Highway 16 South in Bandera, in the middle of ranch country, and we install and service systems for businesses and rural properties across the San Antonio area and the Hill Country, including Bandera, Boerne, Kerrville, Comfort, Fredericksburg, and Floresville. Every project starts with an in-person site walk. Call (210) 721-5080 to schedule yours.
Every installation starts with an in-person site assessment — we don't quote from a floor plan or over the phone. The property determines the design.
We walk the property — every area needing coverage, every entry point, every blind spot. Power and network requirements identified before quoting anything.
A complete camera placement plan with equipment specifications, cable routing, and storage sizing — priced per-item so you know exactly what you're getting.
Clean installation — cameras mounted properly, cables concealed or protected, NVR installed in a secure location, and everything tested end-to-end before we leave.
Mobile app configured and tested on your phone — live view, playback, and motion alerts working before the install is complete.
We show you how to use the system — pull up footage, export a clip, add a user, adjust alerts. The system should be something you can actually use.
Every installation starts with a free on-site assessment. We walk your property, design the coverage plan, and give you a clear proposal — before any commitment.